Improving part-load performance of combined-cycle gas turbines by optimizing variable geometry control strategy for compressor and power turbine combined adjustment

The variable geometry methods currently used in combined-cycle gas turbines are compressor variable inlet guide vanes (VIGV) or power turbine variable area nozzles (VAN). On this basis, this study presents the optimal variable geometry control strategy for compressor and power turbine combined adjustment (Formula: see text) using the Differential Evolutionary Algorithm with the LM2500+ gas turbine. The aim is to further improve the part-load performance of the combined-cycle gas turbine. Firstly, a part-load performance prediction model for variable geometry gas turbines is established based on the component method. Subsequently, a variable geometry gas turbine part-load performance optimization model is developed by combining the Differential Evolution Algorithm. Finally, the optimum combination of stagger angles for the compressor inlet vane and power turbine nozzle is calculated at each part-load condition. Compared to the VIGV and VAN control strategies, the Formula: see text control strategy proposed in this paper shows a higher stability margin and better economy. The Formula: see text control strategy maintains a constant exhaust temperature within a part load range from 20% to 100% with the stability margin exceeding 14%. In comparison with the VAN control strategy, the fuel flow rate decreases by 1.152% at 45% relative load power and by 3.435% at 20.0% relative load power with the Formula: see text control strategy.