Key points are not available for this paper at this time.
The impact of mechanical pressure on electrode stability in full-cells comprising microscale silicon-dominant anodes and NCA cathodes was investigated. We applied different mechanical pressures using spring-compressed T-cells with metallic lithium reference electrodes enabling us to analyze the electrode-specific characteristics. Our investigation covers a wide pressure range from 0.02 MPa (low pressure - LP) to 2.00 MPa (ultra high pressure - UHP) to determine the optimal pressure for cyclic lifetime and energy density. We introduce an experimental methodology considering single-component compression to adjust the cell setup precisely. We characterize the cells using impedance spectroscopy and age them at C/2. In the post-mortem analysis, cross-sections of the aged anodes are measured with scanning electron microscopy. The images are analyzed with regard to electrochemical milling, thickness gain, and porosity decrease by comparing them to the pristine state. The results indicate that cycling at UHP has a detrimental effect on cycle life, being almost two-fold shorter when compared to cycling at normal pressure (NP, 0.20 MPa). Scanning electron microscopy showed a dependency of the thickness and the porosity of the aged silicon anodes on the applied pressure, with coating thickness increasing and porosity decreasing for all pressure settings, and a correlation between thickness and porosity.
Friedrich et al. (Wed,) studied this question.