Numerical simulation-based design of optimized surfaces for condensation heat transfer

Abstract Heat transfer enhancement is a well-established research topic due to its industrial relevance. The advent of 3D printing, also known as additive manufacturing, has opened up the pathway for the design of compact heat exchangers with innovative shapes, complex geometries and smaller size. In particular, additive manufacturing technologies speed up the transition from CAD models to physical prototypes and thus numerical simulation tools for two-phase heat transfer are expected in the future to play a key role for the design of heat exchangers. With regard to filmwise condensation, numerical methods capable to account for all the main forces involved (such as gravity, surface tension, vapor shear stress) must be considered for the optimization of the condensing surfaces. The present study is focused on the preliminary design of innovative shapes for enhancing the condensation heat transfer in a grooved wick heat pipe. Most of the condensation heat transfer studies available in the literature deal with vapor condensing inside tubes or over cylindrical/plain surfaces, while the condensation process occurring inside heat pipes has been less investigated. The grooved wick surfaces must be designed with the aim to promote the drainage of the condensate and minimize the thickness of the liquid film forming over the wick structures. In the present work, the behaviour of different surfaces is studied during condensation of refrigerants by performing Volume of Fluid (VOF) 2D numerical simulations with Ansys®Fluent. The numerical results allow to determine the liquid film thickness and the heat flux distribution along the grooves.