Key points are not available for this paper at this time.
Nuclear batteries, a novel energy device in microelectromechanical systems (MEMS), have garnered significant attention from academia and industry due to their promising application prospects. They possess high energy density and reliable operation without human intervention and offer unique advantages in the case of long-term stable power supply. Among these, thermal conversion nuclear batteries (RTGs) represent the most mature technology and the earliest application, while betavoltaic nuclear batteries have entered commercialization. Challenges in betavoltaic nuclear batteries research include energy wastage due to the self-absorption effect of radioactive sources, low conversion efficiency, and significant radiation damage to transducer devices. These issues are attributable not only to the inherent properties of the radioactive source but also to the material and structural design of transducers. A 3D interface structure design scheme based on the wide bandgap semiconductor material GaN and the radioactive isotope 63Ni nuclear microbatteries is proposed. In the scheme, Geant4 and COMSOL Multiphysics were used to simulate the GaN-based betavoltaic nuclear battery of 63Ni source, and the PN junction 3D interface structure of the transducer was designed and optimized. The effects of the surface area, number of micropillars, thickness, and doping concentration of each region on the battery performance were analyzed. Results indicate that with P- and N- region thicknesses and doping concentrations at 0.1, 9.9 µm, 1 × 1018, and 1 × 1014 cm−3, respectively, the nuclear battery can achieve a conversion efficiency of 7.57%, a short-circuit current density of 0.3959 µA/cm2, an open-circuit voltage of 2.3074 V, and maximum output power of 0.7795 µW/cm2. In addition, discussion regarding the surface area and quantity of P-layer micropillars confirms the hypothesis that these variables are positively correlated with the output performance of the transducer.
Gao et al. (Sat,) studied this question.