Key points are not available for this paper at this time.
The acquisition of low-frequency vibration signals in earthquake exploration is a crucial aspect of seismic exploration technology. Addressing the difficulty current fiber optic sensors face in monitoring low-frequency vibrations, this paper proposes an acceleration sensor based on S-type Fiber Bragg Grating (FBG). First, an FBG acceleration sensor model is established and theoretically analyzed. Then, the impact of structural parameters on the sensor’s sensitivity and natural frequency is examined, employing the ANSYS finite element analysis software for static stress and modal simulation analysis. Finally, a prototype is developed, and a low-frequency vibration testing system is assembled to test the sensor’s performance. The results show that the sensor has a natural frequency of 34 Hz, operates in a frequency band of 0.2–14 Hz, has a dynamic range of 63.5 dB, a lateral interference of less than 3%, a sensitivity of ∼274.45 pm/g, good linearity, and is insensitive to temperature. The findings provide a reference for the development of similar sensors and further exploration of the lower frequency limit.
Hong et al. (Sat,) studied this question.