Key points are not available for this paper at this time.
Turbulent boundary layer inflow is a critical factor in urban climate research, shaping canyon flow dynamics, air ventilation patterns, and heat flux distribution. In numerical simulation studies, it serves as a fundamental inflow boundary condition, profoundly influencing overall results. In this study, simultaneous Particle Image Velocimetry and Laser-Induced Fluorescence (PIV-LIF) measurements are utilized within a large closed-circuit water tunnel. This approach allows comprehensive flow data to be gathered under varied flow and thermal conditions, encompassing a spectrum of Richardson numbers ranging from 0.01 to 1.34. The investigation aims to elucidate the effects of turbulent boundary layer flows on heat transfer mechanisms and flow behaviours within a two-dimensional street canyon model with a unit aspect ratio. The analysis reveals distinct heat and fluid flow characteristics, highlighting the interplay between thermal conditions and flow dynamics. The three chosen turbulent boundary layer flows demonstrate unique influences on flow characteristics and heat removal capacity. Significant variations in ventilation rates are observed, with a maximum difference of 80% among the tested boundary layer flows. Additionally, the most pronounced variation in heat removal capacity is approximately 45%. Thicker boundary layers with lower velocities near the canyon exhibit reduced ventilation and heat removal capabilities. Furthermore, the investigation reveals that varied turbulence inlet profiles result in diverse fluctuating features at the canyon roof level, with a comparatively lesser impact on the deeper regions of the canyon.
Xue et al. (Tue,) studied this question.