Key points are not available for this paper at this time.
In order to improve the contact strength and reduce the sliding friction of the gear pair, an internal cylindrical gear pair with a curved meshing line is studied in this paper. Firstly, a curved meshing line is designed. The tooth profiles of the internal gear pair with the designed meshing line are calculated by using differential geometry and the gear meshing principle. Secondly, a wear model is established by combining the finite element method and the Archard wear formula. Then, a numerical simulation is conducted; the relative curvature, sliding coefficient, sliding distance, maximum contact pressure, transmission error, and wear depth are calculated. Ultimately, the variation law of tooth surface wear of new gear with and without installation errors is observed under different stress cycles. On this basis, the influence of tooth modification on tooth surface wear is further researched. Through the results, the advantages of the introduced novel internal cylindrical gears in wear resistance are further demonstrated. The study in this paper provides new research ideas and methods for gear wear research and gear design.
Jia et al. (Fri,) studied this question.