Ground settlement and tunnel response due to twin-curved shield tunnelling in soft ground with small clear distance

Twin curved tunnels are often encountered in shield tunnelling, where significant complexities in densely exploited underground space are observed. In this study, the ground settlement and tunnel deformation due to twin-curved shield tunnelling in soft ground were investigated using numerical simulation and field monitoring. Different curvature radii of twin curved tunnels and subsequent effects of tunnel construction were considered to reveal the tunnelling effect on ground surface settlement and tunnel deformation. The results show that the settlement trough yields one offset towards inside of curved shield tunnelling. The location of settlement trough and maximum settlement were affected by curvature radius but except for the shape and width of settlement trough. Adjacent parallel twin-curved shield tunnelling could increase the offset of existing settlement trough and maximum settlement. Then, an empirical prediction of surface settlement trough due to twin-curved shield tunnelling with same tunnel diameters in soft clay was proposed, which was applicable to curvature radius less than 800 m. Finally, a minimum radius of 600 m of curvature tunnel was proposed in terms of allowable convergence deformation of tunnel. The result could provide guidance on safety evaluation for twin curved shield tunnelling construction.