Fluid-driven aseismic fault slip with permeability enhancement and dilatancy

Injection-induced seismicity and aseismic slip often involve the reactivation of long-dormant faults, which may have extremely low permeability prior to slip. In contrast, most previous models of fluid-driven aseismic slip have assumed linear pressure diffusion in a fault zone of constant permeability and porosity. Slip occurs within a frictional shear crack whose edge can either lag or lead pressure diffusion, depending on the dimensionless stress-injection parameter that quantifies the prestress and injection conditions. Here, we extend this foundational work by accounting for permeability enhancement and dilatancy, assumed to occur instantaneously upon the onset of slip. The fault zone ahead of the crack is assumed to be impermeable, so fluid flow and pressure diffusion are confined to the interior, slipped part of the crack. The confinement of flow increases the pressurization rate and reduction of fault strength, facilitating crack growth even for severely understressed faults. Suctions from dilatancy slow crack growth, preventing propagation beyond the hydraulic diffusion length. Our new two-dimensional and three-dimensional solutions can facilitate the interpretation of induced seismicity data sets. They are especially relevant for faults in initially low permeability formations, such as shale layers serving as caprock seals for geologic carbon storage, or for hydraulic stimulation of geothermal reservoirs. This article is part of the theme issue ‘Induced seismicity in coupled subsurface systems’.