Extension Mechanism of Water-Conducting Cracks in the Thick and Hard Overlying Strata of Coal Mining Face

It is of great significance for coal safety production and water resource protection in the Yuheng mining area to master the evolution law of water-conducting fractures under the condition of thick and hard overburden. This research focuses on the 2102 fully mechanized mining face in the Balasu Coal Mine as the research background. The fracture evolution and strata movement characteristics in thick and hard overlying strata are simulated and analyzed by combining numerical simulation with physical simulation, and the formation mechanism of a water-conducting fracture in the overlying strata is revealed and verified by field measurements of the development height of “two zones”. The results show that the anisotropy of fracture propagation in low-position overlying strata is high, and the fracture propagation in high-position overlying strata is mainly vertical, which indicates characteristics of leapfrog development. The number and development height of fractures undergo the change–growth process of “slow–rapid–uniform”. Multiple rock strata together form a complex force chain network with multiple strong chain arches. The local stress concentration leads to the initiation of micro-cracks in contact fractures, and the cracks gradually penetrate from bottom to top and then the strong chain arches are broken. The water-conducting cracks in overlying strata show a dynamic expansion process of “local micro-cracks–jumping cracks–through cracks–water-conducting cracks”. The fracture between the caving zone and fracture zone presents obvious layered characteristics, the overall shape of the water-conducting fracture zone is “saddle-shaped”, and the maximum development height lags behind the coal mining face by about 180 m. Through the observation of water injection leakage and borehole TV observation of three boreholes under underground construction, combined with the results of water pressure tests, it is comprehensively determined that the height of the water-conducting fracture zone is 103.68~107.58, and the fracture–production ratio is 31.42~32.60, which is basically consistent with the results of numerical simulation and physical simulation. This research provides theoretical guidance and a scientific basis for coal mine water disaster prevention under similar geological conditions.