Key points are not available for this paper at this time.
The threshing rate is one of the important indexes to evaluate the effect of corn threshing. The weighing method is often used to calculate the depuration rate of maize at present. This method is time-consuming and laborious and can only calculate the overall threshing rate but does not give the threshing rate of individual corn ears. Different parameters of corn ears have complex effects on the threshing rate. By analyzing the threshing rate of each corn ear, we can choose the appropriate ear treatment method, optimize the processing equipment and process flow, and improve the threshing performance. This paper presents a method based on machine vision to detect the threshing rate of corn ears. In this method, machine vision was used to measure the parameters of the corncob and the area of the top of residual kernels. The area of the top of all kernels was restored based on the parameters of the corncob. The threshing rate of corn ears was calculated by the ratio of the area of the top of the missing kernel to the area of the top of all kernels after threshing. A bivariate linear regression area model was established to restore the area of the top of all corn kernels based on corncob parameters. The R2 was more significant than 0.98, and the goodness of fit was good. The machine vision inspection results showed that the maximum relative error of length and midsection radius was 7.46% and 5.55%, and the mean relative error was 2.58% and 2.23%. The maximum relative error of the corn ear threshing rate was 7.08%, and the mean relative error was 2.04%. When the residual kernels were concentrated in the midsection, the inspection result of the corn ear threshing rate was better. The maximum relative error was 3.98%, and the mean relative error was 1.07%. This paper provides a new idea and reference for measuring the threshing rate of corn ears.
Li et al. (Fri,) studied this question.