Key points are not available for this paper at this time.
Metal additive manufacturing (AM) based on laser powder bed fusion (LPBF) generates components by melting metal powder on a layer-by-layer basis. The melting and cooling process often generates samples with a preferred material symmetry aligned with the build direction. This anisotropy affects mechanical performance and can be challenging to characterize nondestructively. Here, LPBF was used to create samples of AlSi10Mg with specific geometries to affect the overall anisotropy. In addition, the hybrid AM process of interlayer milling was used to impact the microstructure and residual stress of some samples. Ultrasonic measurements were used to characterize the samples using both coherent wave and diffuse wave experiments to capture the anisotropic nature of the wave speed and scattering. The material symmetry and morphology of the grains affect the wave speed, attenuation, and backscatter with respect to direction. Furthermore, spatially resolved acoustic spectroscopy was used to provide insight regarding the localized wave speeds with respect to sample location and propagation direction. The experimental data were used collectively to quantify differences between the AM processes used to create the samples. Such information can be used to guide AM process parameters to optimize sample performance. Finally, prospects for characterization of residual stresses will be discussed.
Turner et al. (Fri,) studied this question.