Simulation of flow and heat transfer in high‐temperature and high‐pressure reservoir based on multi‐physical field coupling model at pore scale

Abstract The use of irregular pore‐scale models to study heavy oil reservoirs with high‐temperature, high‐pressure, and high‐stress characteristics is effective. Previous studies have typically focused on regular models and conventional environmental reservoirs, with limited exploration of irregular models and reservoirs in extreme environments. In investigating the process of water displacing heavy oil within reservoirs under high‐temperature, high‐pressure, and high‐stress conditions at the pore scale, the utilization of the four‐parameter method creates a micro‐scale irregular porous media model. The model systematically considers the variation of physical properties of rocks and heavy oil with temperature. The results indicate that an appropriate increase in water injection rate or a decrease in reservoir contact angle will increase the recovery rate, temperature, and stress of the reservoir. At a displacement time of 0.3 s, with the water injection rate increasing from 0.004 to 0.01 m ∙ s −1 , the reservoir's recovery degree experiences an increase of 0.091. Simultaneously, the average temperature and average stress of the reservoir increase by 29.66 K and 1.9464 × 10 9 N · m −2 , respectively. At a displacement time of 0.3 s and with the contact angle decreasing from 2π/3 to π/3, the reservoir's recovery degree increases by 0.44537, and the average temperature and average stress of the reservoir increase by 2.87 K and 1.86 × 10 8 N · m −2 , respectively.