Key points are not available for this paper at this time.
The solar-blind ultraviolet band presents a unique opportunity for low-background-noise detection due to limited atmospheric light transmission. Especially, with the ability to obtain size, shape and position information on the objects, the solar-blind image sensors are receiving increasing attention. However, because the inhibition of the crosstalk in crossbar arrays induces the complexity of the preparation process, rarely are applicable solar-blind UV imaging arrays reported. This work prepared an amorphous gallium oxide (a-Ga2O3)-based diode with a remarkable rectifier ratio of up to 106. Then an imaging array was prepared by one-step method in that the diodes working as the detection elements and the switching elements inhibiting crosstalk were simultaneously deposited. Moreover, a 2 × 2 crossbar array clearly demonstrates the inhibition of the crosstalk. This work presents a simple and cost-effective method for preparing applicable solar-blind imaging arrays that inhibits crosstalk, promoting the practical application of the Ga2O3-based solar-blind UV detectors.
Zhang et al. (Tue,) studied this question.