Key points are not available for this paper at this time.
Squeeze film dampers are used to reduce vibration in aircraft jet engines supported by rolling element bearings. The underlying physics of the squeeze film dampers has been studied extensively over the past 50 years. However, the research on the SFDs is still ongoing due to the complexity of modeling of several effects such as fluid inertia and the modeling of the piston rings, which are often used to seal SFDs. In this work, a special experimental setup has been designed to validate the numerical models of SFDs. This experimental setup can be used with various SFD geometries (including piston ring seals) and simulate almost all conditions that may occur in an aircraft jet engine. This work also focuses on the inertia forces of the fluid. The hydrodynamic pressure distribution of a detailed 3D-CFD model is compared with the solution of the Reynolds equation including inertia effects. Finally, the simulation results are compared with experimental data and good agreement is observed.
Golek et al. (Sat,) studied this question.