Key points are not available for this paper at this time.
A study and performance analysis of magnet positions in different topology on the surface of rotor in permanent magnet synchronous motors (PMSMs) based on finite element method is observed here. A 3-phase interior PMSM is numerically simulated with ANSYS Maxwell 2018.1. Differently positioned permanent magnets improve the performance of PMSMs. Apart from handling nonlinear equations, FEM is used for simulation. ANSYS is used to analyze PMSM performance under variable conditions. This proposal examines a three-phase, 0.55 kW PMSM at 220 V, 50 Hz. Here rotor topologies of five types, namely, (i) spoke/tangential, (ii) saturable bridge / u-shape, (iii) V-shape, (iv) radial, and (v) segmented bridge permanent magnet rotor are taken for observation. The motive of this study is to analyze the performance of PMSMs in different rotor designs with different magnet positions. All topologies have been modeled and simulated with ANSYS. Each topology is compared in terms of electromagnetic and mechanical parameters. The 2D model is used to model the distribution of magnetic fields and the performance of operating parameters under transient and steady-state conditions. Magnetic flux, and efficiency are heavily influenced by the rotor shape with the volume of magnet. A study of radial force distribution and mechanical stress across rotor surface is also discussed. Motor performance is affected by the design of PMs.
Naik et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: