Key points are not available for this paper at this time.
One of the approaches for increasing the contribution of biomass to the renewable energy mix is the valorization of biomass to bioenergy. Evaluating the potential of unconventional biomass sources could significantly accelerate the assessment for suitability as feedstock for bioenergy production as a sustainable solution. The study aimed to characterize the Prosopis africana biomass of wood, barks, leaves, and pods towards providing valuable data for scaling up and incorporating these materials into the bioenergy crop database. Characterizations of wood, leaves, barks, and pod wastes from Prosopis africana biomass were investigated based on the proximate, ultimate, and compositional analysis of pulverized samples of the PA biomass to determine their physical, thermal, and chemical properties towards assessing their potential for valorization to bioenergy. The lignocellulosic materials were characterized by scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. The results show that the pulverized sample wastes have porous structures with varying degrees of crystallinity (wood: 89.20 %, bark: 23.90 %, leaves: 32.48 %, pods: 23.08 %), suggesting different susceptibilities to conversion processes. Notably, the wood sample had the lowest moisture content (3.13 %), and the pod sample had the highest volatile matter content (75.83 %), indicating a high potential for biofuel production. The higher heating values (HHV) and lower heating values (LHV) of the samples ranged from 15.23 to 20.49 MJ/kg and 13.83 to 18.79 MJ/kg, respectively. These calorific values are competitive with established lignocellulosic bioenergy feedstocks, positioning PA biomass as promising candidates for solid biofuel applications.
Uzoagba et al. (Wed,) studied this question.