Silica Aerogel-Incorporated Cement and Lime Plasters for Building Insulation: An Experimental Study

Silica aerogel has remarkable properties, particularly its translucence/transparency, extremely low thermal conductivity and density. Due to these properties, it can be used for the thermal insulation of buildings for energy saving, cost saving, and enhanced comfort. In this context, aerogel products such as aerogel blankets have already started to demonstrate their effectiveness in retrofitting projects and the development and adoption of aerogel glazing systems and aerogel-enhanced renders is promising. Other products, for example, through the incorporation of silica aerogel granules in cement and lime renders were obtained, with high thermal insulation properties, to achieve energy efficiency on buildings facades. This research aims to come up with new aerogel particle composition insulation plasters at cost-effective rates for application in building insulation. Their physical apparent mass density, mechanical–flexural and compressive strengths, thermal conductivity, and properties were investigated. As an experimental study, the thermal conductivities of six sets of cement and lime plasters with aerogel particles (0.1–4.0 mm) were investigated and it was concluded that the thermal conductivity of cement and lime plasters with 80% aerogel was 0.2287 W·m−1·K−1, about 3.4 times smaller than the respective value of traditional lightweight plasters of 0.76 W·m−1·K−1, while the cement and lime plasters with less than 40% aerogel showed a thermal conductivity value as low as 0.3172 W·m−1·K−1. It was confirmed that the end product plasters’ mechanical qualities included low apparent mass densities, no apparent shrinkage, and mechanical strength values that matched those of the prepared compositions. This suggests that the obtained plasters are suitable for use in both new constructions and renovation projects.