Low-carbon metakaolin precursor for one-part and two-part geopolymer activation of demolition wastes

A critical part of civil engineering infrastructure works is to develop innovative construction materials for a low-carbon future development. This study delved into the feasibility of using metakaolin (MK) as a low-carbon precursor for one-part and two-part geopolymer stabilization of recycled demolition wastes. In this research, the effects of MK precursor were evaluated in combination with construction and demolition (C&D) waste aggregates such as crushed brick (CB), reclaimed asphalt (RAP) and recycled concrete (RCA) using one-part and two-part geopolymer activation. Various geotechnical tests were performed including compaction tests, repeated triaxial loading tests (RLT), unconfined compressive strength tests (UCS) and microstructural analysis. Results from this study indicated significant strength development of MK mixtures for both one-part and two-part geopolymer options. Furthermore, one-part geopolymer also showed better activation than two-part geopolymer under 7 days and 20℃ curing condition. Additionally, 30 % MK mixtures were optimal for road construction applications based on the obtained results. At 28 days or 40 ℃, MK mixtures performed best with RCA and CB as main aggregates, showing strength improvement of up to 250 % compared to 7 days and 20 ℃ curing condition. Resilient modulus (Mr) results indicated that the optimal mixtures experienced good resilient behavior with average Mr values ranging from 150 MPa to 200 MPa. Overall, MK precursor was found to be a suitable material for stabilizing demolition aggregates using geopolymer under various curing conditions.