Key points are not available for this paper at this time.
Emerging data processing techniques brought back into attention the HF range communication as an interesting alternative to third-party solutions for IoT applications, such as data transmission in distributed energy production facilities. The physical size of HF antennas, often comparable to the surrounding objects, require in situ radiation measurements resulting in site-customized antenna design and positioning, and consequently in a higher reliability of such HF grid communications. Drone-borne measuring systems are already known as a flexible solution, but are mostly restricted to higher frequency ranges where full-wave, wide-band probes are feasible. In this work, we propose to use an electrically small, folded dipole as a probe for drone-borne measurements on HF antennas. We also propose a calibration approach for the effects related to the near-field zone, and to the drone body proximity; corrections on these two effects are the key methodological steps. We show that despite a realized gain figure in the order of −20 dBi, such a probe can provide stable results for near-field measurements, even at input power levels as low as 1 mW. Compared to other similar approaches, our configuration provides a wider frequency band of operation, higher stability in terms of pattern diagram, and a lower cost.
Pastorcici et al. (Thu,) studied this question.