Preparation and Research on Mechanical Properties of Eco-Friendly Geopolymer Grouting Cementitious Materials Based on Industrial Solid Wastes

Red mud (RM), a hazardous solid waste generated in the alumina production process, of which the mineral composition is mainly hematite, is unable to be applied directly in the cement industry due to its high alkalinity. With the rise of geopolymers, RM-based grouting materials play an essential role in disaster prevention and underground engineering. To adequately reduce the land-based stockpiling of solid wastes, ultrafine calcium oxide, red mud, and slag were utilized as the main raw materials to prepare geopolymers, the C-R-S (calcium oxide–red mud–slag) grouting cementitious materials. The direct impact of red mud addition on the setting time, fluidity, water secretion, mechanical properties, and rheological properties of C-R-S were also investigated. In addition, a scanning electron microscope (SEM), X-ray diffraction (XRD), three-dimensional CT (3D-CT), Fourier transform infrared spectroscopy (FT-IR), and other characterization techniques were used to analyze the microstructure and polymerization mechanism. The related results reveal that the increase in red mud addition leads to an enhanced setting time, and the C-R-S-40 grouting cementitious material (40% red mud addition) exhibits the best fluidity of 27.5 cm, the lowest water secretion rate of 5.7%, and a high mechanical strength of 57.7 MPa. The C-R-S polymer grout conforms to the Herschel–Bulkley model, and the fitted value of R2 is above 0.99. All analyses confirm that the preparation process of C-R-S grouting cementitious material not only substantially improves the utilization rate of red mud, but also provides a theoretical basis for the high-volume application of red mud in the field of grouting.