Microwave-assisted fabrication of high-strength natural fiber hybrid composites for sustainable applications: An experimental and computational study

The present study deals with the fabrication of hybrid composites using biodegradable and ecologically friendly natural fibers and a recyclable thermoplastic matrix. Pure and hybrid natural fiber composites of high-density polyethylene (HDPE) with Kenaf and Ramie fiber, 20 wt%, were fabricated using microwave-assisted compression molding. The composite's mechanical characterization was performed using tensile, flexural, impact, and hardness tests. X-ray diffraction was done to investigate the crystallinity percentage, and scanning electron microscopy of fractured surfaces was performed to determine failure mechanisms. The hybrid composite of HDPE/Ramie and Kenaf exhibited the highest ultimate tensile strength (UTS) at 29.3 ± 1.2 MPa, surpassing HDPE/Kenaf (21.6 ± 1.1 MPa) and HDPE/Ramie (24.3 ± 1.4 MPa) composites. In terms of flexural strength, HDPE/Ramie demonstrated the highest at 19.9 ± 1.5 MPa, while HDPE/Kenaf had the lowest at 18 ± 1.1 MPa. The hybrid composite's flexural strength was intermediate at 19 ± 1.3 MPa. Impact strength followed a similar trend, with the hybrid composite leading at 40.2 KJ/m 2 , followed by HDPE/Ramie (26.9 KJ/m 2 ) and HDPE/Kenaf (12.3 KJ/m 2 ). Hardness tests revealed the highest hardness in the hybrid composite and the lowest in HDPE/Kenaf. A computational study has been performed to develop a model for predicting the hybrid composites. A strong agreement between both studies has been observed. The developed composite is deemed suitable for various light-duty applications, such as roofing, car interior panels, and mobile covers, offering potential benefits in reducing carbon footprint.