Key points are not available for this paper at this time.
To explore the influence of cavitation on the internal fluid excitation characteristics of pumps, numerical simulations and performance testing evaluations were performed on the IS65-50-125 centrifugal pump. The prototype pump's exterior characteristic and cavitation performance curves, as well as its bubble volume distribution, were successfully replicated using numerical computations. The effect of cavitation on the internal pressure pulsation characteristics of the centrifugal pump under various operating situations was comprehensively investigated, indicating a relationship between the degree of cavitation and the root mean square values of pressure pulsation. Special emphasis was placed on the changes in features at intermediate and high frequencies, as well as the processes of rising bubble volume and vortex shedding at the impeller trailing edge on pressure pulsation. To validate the simulation results, a centrifugal pump vibration and noise testing platform was built, and studies on vibration intensity and internal sound field noise were conducted. The experimental results revealed that the vibration intensity and internal sound field sound pressure level of the centrifugal pump rose as cavitation conditions deteriorated, confirming the modeling results. This study's significant innovation is the precise identification of the pump's performance changes under different operating conditions by monitoring pressure pulsation changes at various frequencies, as well as an in-depth discussion of the impact mechanism of cavitation phenomena on the internal fluid excitation behavior of centrifugal pumps. The study demonstrates differences in pressure pulsation characteristics on the suction and pressure sides under various cavitation situations, as well as the process of vortex creation and shedding generated by bubbles in the impeller input channel during severe cavitation. This gives new theoretical basis for pump vibration and noise reduction, as well as significant improvements in centrifugal pump performance and stability.
Wang et al. (Thu,) studied this question.