Key points are not available for this paper at this time.
The awareness of possible environmental hazards caused by the widespread global use of volatile methylsiloxanes (VMSs) in personal care products (PCPs) and industrial processes has been increasing. Sewage containing these compounds may reach wastewater treatment plants (WWTPs), which are hotspots of their release into the environment. The levels, distribution, and potential risks of VMSs were studied in an unprecedently comprehensive sampling strategy (four seasonal campaigns) along the water line of a WWTP: the main influent entrance (SA1), after the preliminary treatment (SA2), after the primary treatment (SA3) and after the secondary treatment (the treated effluent; SA4). This WWTP was selected as a representative of the conventional set up based on a secondary treatment, allowing a similar approach in numerous facilities worldwide. Seven VMSs (L3, L4, L5, D3, D4, D5, D6) were analysed in wastewater samples by a small-scale liquid-liquid extraction (LLE) protocol, followed by gas chromatography-mass spectrometry (GC-MS), and the cyclic VMSs were dominant at all sampling sites and in all seasons. Considering the whole year, the total VMSs ranged from 0.4 to 22.5 μg L
Bernardo et al. (Tue,) studied this question.