Solid-State Lithium Batteries with in-Situ Polymerized Acrylate-Based Electrolytes Capable of Electrochemically Stable Operation at 100 ℃

In-situ polymerized acrylate-based polymers are very appealing as solid polymer electrolytes (SPEs) in lithium (Li) batteries due to the drop-in compatibility of such in-situ polymerization with conventional battery production, the ease of acrylate polymerization and their inexpensive, facile SPE chemistry. We identified, however, that such SPEs suffer from either a low cationic transference number with dual ion conducting salts (0.12-0.2) or a low ionic conductivity with single Li-ion conducting (SLIC) salts (6·10 -6 S cm -1 ). In this project we overcame these limitations and developed significantly improved SPE with ionic conductivity of up to 2·10 -4 Scm -1 and a relatively high Li-ion transference number of 0.4. With a significantly reduced fraction of mobile anions in the hybrid SPE, in-situ polymerized SPE cells with an LiFePO 4 (LFP) cathode achieve a stable performance for over 100 cycles at temperatures as high as 100 °C, which is unattainable with conventional Li salts or electrolytes. Furthermore, the motional narrowing observed in the line-shapes of solid-state nuclear magnetic resonance (SS-NMR) spectra provided additional insights of the differences in Li nucleus environments and revealed a reduced activation energy for the hybrid salt SPEs due to their more open structure. This study opens the path for the fabrication of high-performance solid polymer lithium batteries capable of operating at high temperatures using commercial battery fabrication equipment. We expect that further tuning of the acrylate based SPE composition may allow further increases in its conductivity without sacrifices in its electrochemical stability or mechanical properties.