Key points are not available for this paper at this time.
Abstract Low‐field strength scanners present an opportunity for more inclusive imaging exams and bring several challenges including lower signal‐to‐noise ratio (SNR) and longer scan times. Magnetic resonance fingerprinting (MRF) is a rapid quantitative multiparametric method that can enable multiple quantitative maps simultaneously. To demonstrate the feasibility of an MRF sequence for knee cartilage evaluation in a 0.55T system we performed repeatability and accuracy experiments with agar‐gel phantoms. Additionally, five healthy volunteers (age 32 ± 4 years old, 2 females) were scanned at 3T and 0.55T. The MRI acquisition protocols include a stack‐of‐stars T 1ρ ‐enabled MRF sequence, a VIBE sequence with variable flip angles (VFA) for T 1 mapping, and fat‐suppressed turbo flash (TFL) sequences for T 2 and T 1ρ mappings. Double‐Echo steady‐state (DESS) sequence was also used for cartilage segmentation. Acquisitions were performed at two different field strengths, 0.55T and 3T, with the same sequences but protocols were slightly different to accommodate differences in signal‐to‐noise ratio and relaxation times. Cartilage segmentation was done using five compartments. T 1 , T 2 , and T 1ρ values were measured in the knee cartilage using both MRF and conventional relaxometry sequences. The MRF sequence demonstrated excellent repeatability in a test–retest experiment with model agar‐gel phantoms, as demonstrated with correlation and Bland–Altman plots. Underestimation of T 1 values was observed on both field strengths, with the average global difference between reference values and the MRF being 151 ms at 0.55T and 337 ms at 3T. At 0.55T, MRF measurements presented significant biases but strong correlations with the reference measurements. Although a larger error was present in T 1 measurements, MRF measurements trended similarly to the conventional measurements for human subjects and model agar‐gel phantoms.
Moura et al. (Wed,) studied this question.