Key points are not available for this paper at this time.
A facile rapid-combustion process was introduced for preparing magnetic CoxMgyCu(1-x-y)Fe2O4 nanoparticles, and to enhance their specific surface area and saturation magnetization, the optimization involved adjusting the element proportion, calcination temperature, and solvent amount. The optimal element proportion of x:y:(1-x-y) for CoxMgyCu(1-x-y)Fe2O4 nanoparticles was 0.1:0.7:0.2, and the effects of solvent amount, and calcination temperature were also investigated. The average particle size and specific surface area of Co0.1Mg0.7Cu0.2Fe2O4 nanoparticles calcined at 400 °C with 25 mL absolute alcohol were 17.9 nm and 56.96 m2/g, respectively; while demonstrating a saturation magnetization of 8.5 emu/g. To solve the increasingly severe issue of water pollution, these nanoparticles were employed to efficiently treat dye wastewater containing methyl blue (MB). After fitting kinetic and isotherm models, the adsorption process of magnetic Co0.1Mg0.7Cu0.2Fe2O4 nanoparticles for MB dominated by chemisorption and was a multilayer adsorption process. The adsorption isotherm experiments revealed a remarkable maximum adsorption capacity of methyl blue, reaching 2255.7 mg/g, within the concentration range of MB from 400 to 4000 mg/L. The thermodynamic analysis indicated the spontaneity of the exothermic adsorption process. The studies on the effect of pH also led to satisfying results; while the residual adsorption capacity could still remain 91.2% initial adsorbance after 12 times recycle. The outstanding recycling ability, resistance to ionic strength, and pH resistance distinguished the magnetic Co0.1Mg0.7Cu0.2Fe2O4 nanoparticles among vast adsorbents. These results highlight the significant potential of these nanoparticles for treating dye wastewater.
Zhang et al. (Fri,) studied this question.