Key points are not available for this paper at this time.
Abstract Silica is a renewable resource that has become the primary filler for the rubber used in eco‐friendly tires. However, silica tends to agglomerate in the rubber matrix, particularly, micro‐ and nano‐scale silica, which limits its application. When ordinary‐particle‐size silica with low cost and high stacking density is modified using appropriate methods, high dispersion in rubber and good performance can be achieved with common processing equipment, which has significant engineering application value. In this study, silica particles with different sizes (nano‐scale, 19 and 45 μm) were treated with a 3‐mercaptopropyltriethoxysilane coupling agent (KH580). Subsequently, the silica with the ordinary particle size of 300 mesh (45 μm) was coated with natural latex (NL), and the mechanical properties of the modified silica‐filled styrene‐butadiene rubber (SBR)/carbon black (CB) compounds were investigated. The results revealed that the mechanical properties of the NL‐coated 45 μm silica‐filled composite improved significantly, particularly, in the area of tear strength and elongation at break, the composite properties were improved by 17.1% and 118.2%, respectively. Excellent performance over composites filled with coupling agent‐treated micron‐ and nanoscale silica. Enhancing the surface modification of silica through latex coating provides a means to improve the efficiency of industrial production and reduce costs. Highlights The low‐fine silica treated with KH580 has good dispersibility. Improved mechanical compatibility of NL‐coated silica with rubber. Improvement in strain performance of composites after NL coated with silica. The effect of silica dispersion on composite properties is greater than the effect of particle size. Industrial silica can be successfully addressed, paving the way for extensive utilization.
Liang et al. (Mon,) studied this question.