Key points are not available for this paper at this time.
In this study, a high-isolation dual-band (28/38 GHz) multiple-input–multiple-output (MIMO) antenna for 5G millimeter-wave indoor applications is presented. The antenna consists of two interconnected patches. The primary patch is connected to the inset feed, while the secondary patch is arc-shaped and positioned over the main patch, opposite to the feed. Both patches function in the lower 28 GHz band, while the primary patch is accountable for inducing the upper 38 GHz band. An expedited trust-region (TR) algorithm is employed to optimize the dimensions of the antenna components, ensuring the antenna operates efficiently with high reflection at both bands. The antenna demonstrates a gain exceeding 7 dBi at both frequencies. An array of four antennas is configured orthogonally to create a MIMO system with isolation surpassing 19 dB. The isolation is further enhanced through the addition of a circular parasitic patch at the front and modifications made to the ground. The TR method is employed again to optimize their parameters and achieve the desired isolation, exceeding 32 dB at both bands. The MIMO system demonstrates outstanding diversity performance at both frequencies, characterized by low values of the envelope correlation coefficient (ECC) (< 10 − 4), channel capacity loss (CCL) (< 0.03 bit/s/Hz), and total active reflection coefficient (TARC) (< − 10 dB). Additionally, it secures a diversity gain (DG) exceeding 9.99 dB. The MIMO system is manufactured and tested, showing good alignment between simulation and measurement data for all performance metrics.
Esmail et al. (Tue,) studied this question.