Key points are not available for this paper at this time.
Abstract Background Polymers in practical applications often face diverse torsional loads, such as polymeric gears, couplings, scaffolds, etc. Meanwhile, additive manufacturing enables the creation of intricate geometries for specific needs and its application to fabricate various component parts has grown exponentially. Nevertheless, research on cyclic and reversed cyclic torsional loading of additively-manufactured polymers is very limited. Objective Mechanical characterization of monotonic, cyclic, and reversed cyclic torsion in polylactic acid (PLA), PLA Premium, and PLA Tough materials. Methods Specimens were 3D-printed with a 0° build orientation using an extrusion technique and two infill orientation angles (± 45° and 0°/90°). Specimens were subjected to underwent monotonic, cyclic, and reversed cyclic torsion until failure. Results Regardless of material type, ductile fracture governed the behavior under monotonic loading and brittle failure under cyclic and reversed cyclic loadings. Specimens with a ± 45° infill orientation outperformed their 0°/90° counterparts across all materials, with PLA Premium exhibiting superior performance compared to PLA and PLA Tough. Importantly, it was demonstrated that the previously-proposed multilinear idealized shear stress-shear strain curve, developed for monotonic loading of 15 different polymers, also applies to the envelope curves of cyclic and reversed cyclic loading in PLA-based polymers. Thus, it is useful as material model input for numerical simulation purposes.
Sadaghian et al. (Thu,) studied this question.