Investigation of a Tube-Launched Unmanned Aerial Vehicle with a Variable-Sweep Wing

Foldable wings are designed for tube-launched unmanned aerial vehicles (UAVs), aiming to improve portability and meet launch platform requirements. However, conventional tube-launched UAVs cannot operate across the wide speed ranges required for the performance of multiple missions, due to the fixed configuration of their wings after launch. This study therefore proposes a tube-launched UAV which can change wing-sweep angle to expand the flight speed range and enhance the UAV’s agility. A computational aerodynamics method is employed to assess the transient aerodynamic performance of the UAV during the sweep morphing process. The simulation results indicate that the transient aerodynamic forces generate a dynamic hysteresis loop around the quasi-steady data. The lift and drag coefficients exhibit maximum relative deviations of 18.5% and 12.7% from the quasi-steady data for the sweep morphing period of 0.5 s. The hysteresis effect of the flow structure, rather than the additional velocity resulting from wing-sweep morphing, is the major contributor to the aerodynamic hysteresis loop. Compared to the conventional tube-launched UAVs, the proposed tube-launched UAV with a variable-sweep wing shows a wider flight speed range, from 22.59 to 90.12 m/s, and achieves an 82.84% increase in loitering speed. To verify the effectiveness of the wing-sweeping concept, a prototype was developed, and a flight test was carried out. The test data obtained from flight control system agree well with the simulation data, which demonstrates the feasibility and effectiveness of the variable-sweep wing in widening the speed range for tube-launched UAVs. This work can provide a reference for the design of tube-launched UAVs for wide speed range flight.