Key points are not available for this paper at this time.
Flexible and wearable pressure sensors have attracted significant attention in the fields of smart medicine and human health monitoring. Nevertheless, the design and fabrication of degradable disposable pressure sensors still face urgent challenges. Herein, we fabricated poly(3-hydroxybutyrate) (PHB)-reinforced chitosan (CS) piezoelectric films for intelligent sensors through a simple, low-cost, and environmentally friendly roll-forming method. The results show that PHB doping successfully increased the effective piezoelectric coefficient of the chitosan-based film from 40.12 to 49.38 pm/V (a 23% increase). Simultaneously, the pressure sensor based on the CS/PHB film exhibited excellent response sensitivity (484 mV/kPa) and a wide linear response range (0-130 kPa), which could be used as haptic sensors and motion monitoring sensors for the fast response to human motion signals. Additionally, the CS/PHB film could be completely degraded within 18 days in a natural soil environment, demonstrating outstanding degradability. Therefore, chitosan-based piezoelectric films with excellent biodegradability and piezoelectric characteristics have been successfully fabricated in this work, which will promote the innovative development of green chitosan-based electronic devices and disposable pressure sensors.
Sun et al. (Fri,) studied this question.