Effect of Zn amount on AlZn-based composite material produced by high speed mechanical alloying method

Purpose The purpose of this study is AlZn-based produced by high speed mechanical alloying method to investigate the effect of Zn amount on the composite material, Al-Zn-Mg-Cu-SiC composite material billets are obtained by sintering. Design/methodology/approach Mechanical alloying, X-ray diffraction analysis (XRD) graphics, sintering, polishing, scanning electron microscopy and energy dispersive X-ray analyzer (EDX) images and micro hardness tests were applied, respectively. Findings In the XRD analysis results, it was observed that the Al peak height decreased as the alloying time increased. When the samples sintered for 90 min are examined, it can be clearly seen that the hardness increases as the Zn ratio increases. EDX analysis results also support XRD results. Originality/value Increase in strength will require the use of thinner sheet metal and smaller rivets to achieve the same strength. This will reduce the weight of the aircraft. Weight reduction also means less fuel consumption and more economical flight. This increase in strength is a very important scientific achievement.