Key points are not available for this paper at this time.
Abstract Background Reliable FT4 measurements are vital for accurate diagnosis and effective management of thyroid disorders. However, currently used FT4 immunoassays (IAs) lack standardization, leading to significant variations between platforms. Equilibrium dialysis (ED) coupled with LC-MS/MS analysis, considered the gold standard for FT4 measurement, has been adopted as a reference measurement procedure (RMP) for IA standardization. This study aimed to establish a high-throughput version of the routine clinical FT4 assay based on ED-LC/MS/MS technology and assess the impact of altered assay conditions on measurement accuracy. Methods A commercially available micro-ED plate was employed for ED-LC/MS/MS analysis. FT4 extraction from the dialysate was performed by utilizing a 96-well C18 SPE plate, followed by FT4 quantitation via LC-MS/MS in positive ion mode. Certified primary reference material was used to calibrate the assay. To evaluate assay robustness, the effects of minor method modifications were studied, including incubation time of ED, serum/buffer ratios in ED inserts, ED incubation temperature, shaker speed during ED, serum sample dilution ratio, and dialysate sample dilution ratio. Additionally, short-term and long-term stability of serum FT4 were assessed. Results The developed ED-LC/MS/MS assay successfully resolved T4, T3, reverse triiodothyronine (rT3), and other interferences within 4 minutes using C18 chromatography. The assay's linear range (0.5-100 pg/mL) encompassed clinically relevant FT4 concentrations across hypo- and hyperthyroid patient samples. Excellent agreement was observed between the routine assay based on ED-LC/MS/MS and CDC RMP with a Deming regression slope near 1 (95%CI: 0.87-1.06). Furthermore, serum/buffer ratios from 1:1 to 1:2.5 in ED inserts, shaker speeds from 75 to 150 rpm, and ED incubation times from 16 to 20 hours did not significantly affect FT4 measurement. However, elevated ED temperature (38°C) led to a more than 10% increase in FT4 values. Serum FT4 remained stable when exposed to room temperature for 12 hours, five freeze-thaw cycles, and -70°C storage for 1.5 years. Additionally, dilution of sera by up to 3-fold before ED did not alter FT4 measurement results. Diluting dialysate samples at least 3 times prior to SPE extraction proved accurate for samples exceeding the calibration curve range. Conclusions In conclusion, we successfully developed a routine clinical FT4 assay based on ED-LC/MS/MS that generates data comparable to the RMP. The assay exhibits robustness, with several altered conditions not significantly impacting measurement accuracy. This high-throughput and accurate assay demonstrates suitability for both clinical laboratories and large-scale epidemiological studies. Disclaimer: The findings and conclusions in this report are those of the author(s) and do not necessarily represent the official position of the Centers for Disease Control and Prevention/the Agency for Toxic Substances and Disease Registry. Use of trade names is for identification only and does not imply endorsement by the Centers for Disease Control and Prevention, the Public Health Service, and the US Department of Health and Human Services.
Zhang et al. (Tue,) studied this question.