Key points are not available for this paper at this time.
Physical properties of the binary solutions, toluene with 2-propanol and 2-methyl-1-propanol, were measured at T = 293.15, 298.15, 303.15, 308.15, and 313.15 K and P = 100 kPa. The experimental density values were tested with the Emmerling et al. and Gonzalez-Olmos–Iglesias equations. The results indicate that the equation by Emmerling et al. is the best to correlate the density for toluene + 2-methyl-1-propanol system, while for toluene + 2-propanol, both proposed equations are proper to correlate the density with composition and temperature. The viscosity results were verified with different models containing two adjustable parameters. The values of viscosity deviation (∆η), excess molar volume (VE), excess Gibbs energy (ΔG*E), partial molar volumes (V1¯ and V2¯), and apparent molar volume (Vφ,1 and Vφ,2) were calculated. The values of the excess molar volume were positive for both systems, while negative values were obtained for the viscosity deviation and the excess Gibbs energy. The excess properties of the mixtures were adjusted to the Redlich–Kister equation. The values of thermodynamic functions of activation of viscous flow were computed and analyzed. Additionally, the Prigogine–Flory–Patterson (PFP) theory was applied to calculate VE and then compared with experimental values. The values of the percentage absolute average deviation obtained suggest the validity of this theory. The Fourier transform infrared spectroscopy (FTIR) spectra of the binary solutions studied in this work allowed for the understanding of the interactions between the molecules of these systems.
Naum et al. (Fri,) studied this question.