Key points are not available for this paper at this time.
Vegetation concrete is increasingly being used for slope stabilization in highways, green roofing in urban developments, and erosion control in coastal areas due to its sustainable solutions for enhancing landscape aesthetics, mitigating pollution, and protecting the environment. However, the environmental and economic impacts of different mix proportions, particularly concerning CO 2 emissions, remain insufficiently explored. This study aimed to identify the optimal mix proportions of vegetation concrete through laboratory testing that minimize CO 2 emissions while ensuring compatibility with plant growth and cost-effectiveness. The vegetation concrete mix were prepared using different quantities of biochar (5 %, 10 %, and 15 %) and cement content (4 %, 8 %, and 12 %) by weight to evaluate their impact on porosity, unconfined compressive strength (UCS), alkalinity, plant compatibility, cost-effectiveness, and CO 2 emissions from raw materials. The results indicate that increasing the biochar content from 0 % to 15 % led to a 16 % reduction in porosity and a 92 % increase in UCS of vegetation concrete. Similarly, increasing the cement content from 0 % to 12 % resulted in an 11 % decrease in porosity and a substantial 200 % increase in the UCS of vegetation concrete. Moreover, the addition of 5 % biochar had a beneficial effect on plant growth, however, increasing the biochar content beyond this level adversely impacted plant development. Based on laboratory test results, the recommended optimal mix for vegetation concrete includes a mix of 5 % biochar, 8 % low-alkaline sulfoaluminate cement, 6 % sawdust, and 6 % ferrous sulfate. The analysis of CO 2 emission of the materials studied showed that cement contributed the most to CO 2 emissions, followed by biochar, sawdust, water, and soil. Notably, the utilization of sulfoaluminate cement led to a 31.8 % reduction in CO 2 emissions compared to Portland cement, while also lowering the overall cost of vegetation concrete by 24.7–33.8 %. This research underscores the necessity of scientifically establishing relationships between the composition of plant-based concretes and their environmental and economic performance. In summary, this study identifies optimal mix proportions for vegetation concrete, leveraging low-alkaline sulfoaluminate cement and biochar to minimize CO 2 emissions, enhance landscape aesthetics, and ensure compatibility with plant growth, thus emphasizing its potential as a sustainable and cost-effective construction material.
Hamid et al. (Wed,) studied this question.