Key points are not available for this paper at this time.
This study explored nanoparticle (NP)‐assisted bioethanol production from seven lignocellulosic biomass (LCB) types: corn cob ( Zea mays ), wheat bran ( Triticum aestivum ), sugarcane ( Saccharum officinarum ), magnolia ( Magnolia grandiflora ), London plane ( Platanus acerifolia ), chestnut ( Castanea sativa ), and wire grass ( Aristida ). A deashing step was employed to address the high ash content of the biomass utilizing citric acid trisodium dihydrate salt followed by autoclaving at 120°C for 4 h. The treated biomass was hydrolyzed using cerium‐doped iron oxide (CeFe 3 O 4 ) nanoparticles (NPs). Corn cob hydrolysis without pretreatment yielded the highest concentrations of glucose (33.5 ± 0.82 g/L) and xylose (26.7 ± 0.98 g/L). Subsequently, fermentation with Saccharomyces cerevisiae produced the highest ethanol concentration of 28.8 ± 1.63 g/L and a productivity of 2.39 ± 0.13 g/L/h within 12 h. CeFe 3 O 4 NPs also, facilitated xylose metabolism and were recyclable. This method enhances biomass conversion efficiency, making bioethanol production more cost‐effective and environmentally friendly.
Singh et al. (Wed,) studied this question.