Fractured tight sandstone reservoirs pose challenges for gas development due to low matrix porosity and permeability, complex pore structures, and pervasive fractures. This study focuses on the Bashijiqike Formation in the Keshen Gas Field, Kuqa Depression, aiming to clarify the geological controls on reservoir quality. Lithofacies, diagenetic facies, and fracture facies were systematically classified by core analyses, thin sections, scanning electron microscopy (SEM), cathodoluminescence (CL), X-ray diffraction (XRD), grain size analyses, mercury intrusion capillary pressure (MICP), well logs and resistivity imaging logging (FMI). Their impacts on porosity, permeability and gas productivity were quantitatively assessed. A ternary reservoir quality assessment model was established by coupling these three factors. Results show that five lithofacies, four diagenetic facies, and four fracture facies jointly control reservoir performance. The high-energy gravelly sandstone facies exhibit an average porosity of 6.0% and average permeability of 0.066 mD, while the fine-grained sandstone shows poor properties due to compaction and clay content. Unstable component dissolution facies enhance secondary porosity to 6.0% and permeability to 0.093 mD. Reticulate and conjugate fracture patterns correspond to gas production rates two to five times higher than those with single fractures. These findings support targeted reservoir classification and improved development strategies for ultra-deep tight gas reservoirs.
Song et al. (Tue,) studied this question.