The POLAR-2 mission consists of 3 instruments designed with the combined aim of producing a deeper understanding of Gamma-Ray Bursts. To achieve this, POLAR-2 relies on polarisation measurements and, for the first time will provide these using 2 separate polarimeter detectors. The first of these is a payload optimised to perform Compton polarimetry measurements in the 40-1000 keV energy range using a combination of plastic scintillators and SiPMs. The development of this payload, the design of which is based on lessons learned from the POLAR mission, included optimization of plastic scintillator design. In addition, its development included detailed characterization, space qualification and radiation damage and mitigation strategies for the large number of silicon photo-multipliers included in the design. We will present these along with an overview of the readout electronics. These electronics were developed with flexibility in mind, as well as low cost and low power consumption. As such, its design is of interest beyond this polarimeter and is also used on the spectrometer instrument of POLAR-2 where it is used to read out an array of GAGG:Ce scintillators. This readout, in combination with a coded mask, allows this secondary instrument to provide detailed spectral and localization measurements. The final instrument used in the mission aims to use gas-based detectors to perform polarization measurements in the keV energy region. The novelty of this design is that it will be optimized to use these for wide field of view observations. The combination of the three instruments will allow to perform detailed spectral, localization and polarization measurements of these transient phenomena together for the first time. Here we provide an overview of the technologies employed in the mission along with detailed predictions on its capabilities after its launch currently foreseen in 2027.
Kole et al. (Thu,) studied this question.