Screw piles are widely used in infrastructure, such as railways, highways, and ports, etc., owing to their large pile resistance compared to unthreaded piles. While most screw pile research focuses on single pile behavior under rotational installation using torque-capacity correlations. Limited studies investigate group effects under alternative installation methods. In this study, the load-transfer mechanism of screw piles and soil displacement under vertical installation was explored using laboratory model tests combined with digital image correlation techniques. In addition, numerical simulations using the discrete element method were performed. Based on both lab tests and numerical simulation results, it is discovered that the ultimate bearing capacity of a single screw pile was approximately 50% higher than that of a cylindrical pile with the same outer diameter and length. For pile groups, the group effect coefficient of a triple-pile group composed of screw piles was 0.64, while that of cylindrical piles was 0.55. This phenomenon was caused by the unique thread-soil interaction of screw piles. The threads generated greater side resistance and reduced stress concentration at the pile tip compared with cylindrical piles. Moreover, the effects of pile type, pile number, embedment length, pile spacing, and thread pitch on pile resistance and soil displacement were also investigated. The findings in this study revealed the micro–macro correspondence of screw pile performance and can serve as references for pile construction in practice.
Bai et al. (Sat,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: