Sixteen beam–column joints with different column types and connection configurations were designed and tested to identify suitable joints for low-rise prefabricated square steel tube (SST) columns and H-beams. The columns included hollow square steel tube (HSST) and concrete-filled square steel tube (CFSST) types, while the joints consisted of welded, end plate, flange-connected, and angle connector plate configurations. Cyclic loading tests were conducted to examine failure modes, hysteresis and skeleton curves, stiffness degradation, and cumulative energy dissipation. The results showed that joints with angle connector plates outperformed welded, end-plate, and flange-connected joints. The height of the triangular stiffener was found to be a critical factor, with a 144 mm stiffener increasing the ultimate bending moment by 78.65% for CFSST and 79.3% for HSST columns, along with notable improvements in stiffness and energy dissipation. Based on Eurocode 3, angle connector plate joints with high stiffeners were classified as semi-rigid and full-strength. A combined assessment of mechanical behavior and economic efficiency indicated that this joint type provides the highest cost-effectiveness and significant application potential.
Zhang et al. (Sun,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: