Pumped storage power stations provide essential benefits to power grids by cutting peak loads, filling valleys, and boosting renewable energy integration rates. They serve as the foundation for developing a new power system based on renewable energy. Pump turbines are currently evolving to provide higher heads, larger capacities, and higher rotating speeds. The performance and dependability of its basic components have a direct impact on the safety and stability of unit operation. Based on this, this research looks into the modal characteristics and structural aspects of essential stationary components, such as the pump-turbine head cover. By comparing the mechanical performance of two different structural designs (Design A and Design B), Design B features an overall thickness 1.5 times that of Design A and incorporates an upper flange structure. Its design aims to enhance the component’s resistance to bending and deformation, optimize stress distribution while reducing peak stress values, and improve modal characteristics. This approach elevates the overall structural performance of the fixed components to accommodate the complex operating conditions of ultra-high-head pumped storage units. It was discovered that Design B had greater bending and deformation resistance than Design A, as well as better stress distribution and lower maximum stress values. This study further indicates that variations in structural design lead to significant differences in modal characteristics and overall structural performance. In particular, the thicknesses of the head cover’s main body and stiffening ribs are critical parameters that govern the modal behavior and structural properties of stationary components. These insights provide critical technical guidance for optimizing the design of stationary parts, such as the head cover, in pumped storage power plant units.
A Wed, study studied this question.