Wind turbine noise generation and propagation through large eddy simulation and acoustic analogy

We present an acoustic characterisation of a model-scale wind turbine using large eddy simulation and the acoustic analogy. The analysis is representative of medium-sized turbines with low tip Mach number (0. 10). The fluid dynamic analysis revealed: a turbulent boundary layer over the blades, together with a trailing edge vortex sheet; a complex near-wake structure, including tip and root vortices; an intermediate wake with vortex instabilities triggering leap-frogging and vortex grouping mechanisms; and a far wake characterised by fully developed turbulence. Two primary noise generation mechanisms were identified. The unsteady pressure field over the turbine surface generates tonal noise at the blade passing frequency and a high-frequency broadband noise, associated with the trailing edge vortex sheet (linear-noise contribution). The turbulent wake generates broadband low-frequency noise, driven by the complex fluid-dynamic processes outlined previously (nonlinear noise contribution). The linear part of the noise was found to dominate over the nonlinear one in the acoustic far field, while the opposite is true in the acoustic near field. As a composition of the two contributions to the noise, the directivity exhibits a non-symmetric dipole shape oriented along the flow direction, with lobes recovering symmetry moving from the near to the far field. Finally, analysis of the acoustic decay rates reveals that the linear term in the near field decays according to an r^- (n+1) law within the rotor plane, where n is the number of blades, consistent with recent findings on the acoustics of rotating sources.