Key points are not available for this paper at this time.
The demand for heavy-duty 5% (HD5) propane is expected to increase in the future due to the use of the gas as a fuel for engines. A refinery produces HD10 propane, and it is looking to upgrade to HD5 propane using either the conventional process (distillation) or an energy-saving unit (membrane). This study compared the two technologies in terms of product quality and quantity using process simulation in UniSIM®. The software also provided the design parameters and power consumption for the two processes. The results show that the membrane was competitive with distillation and was capable of producing 96 mol% propane with a recovery of 99.3%. On the other hand, distillation achieved a maximum propane quality of 95 mol% with a recovery of 99.9%. Surprisingly, the energy consumption in the membrane was 669 kWh, which was higher than that of distillation (540 kWh) due to the requirement for a pre-heating step. Therefore, the technology should be selected based on either the quality or quantity of propane.
Alqaheem et al. (2025) studied this question.