Many studies on solar heating systems have examined individual techniques to enhance the performance of solar water collectors, such as flow obstructions, increased turbulence, nanofluids, and investment in thermal storage. The benefits of integrating these sustainability strategies into a single, sustainable system have yet to be fully established. This work displays a hybrid water-heating system that contains a solar water collector (SWC) and an electric water heater (EWH), a photovoltaic panel (PV), and nano-additives to increase the outlet water temperature and improve thermal efficiency. Numerical and experimental analyses were used to estimate the influence of water flow rate (2.5, 3.5, and 4.5 L/min) and different Al2O3 concentrations (0.1%, 0.2%, and 0.3%) on system performance using U-shaped pipe in SWC model. The results highlight that lower flow rates consistently yield higher ΔT values because water spends a longer time in the collector, allowing it to absorb more heat. Also, when using water only, the collector efficiency increases pro-aggressively with flow rate. A significant performance enhancement is observed upon incorporating Al2O3 nanoparticles into the fluid, with a 0.1% Al2O3 volume concentration improving efficiency by ~7.4% over water. At 0.3%, the highest improvement is recorded, yielding a ~9.3% gain in efficiency compared to the base case.
AL-abboodi et al. (Mon,) studied this question.