The Correlation of Thermodynamic Modelling and Experimental Methods in the Production of Nickel Matte from Saprolite Nickel Ore via CaS

Given the importance of nickel in lithium-ion batteries and the expectation of the growth in electric vehicles and electrical devices, the demand for nickel in battery production is expected to increase dramatically. Nickel is primarily sourced from laterite saprolite ore, and there is now substantial interest in moving from ferronickel smelting technology to nickel matte technology in its processing to produce high-grade nickel. This research involved a thermodynamic modelling and lab–scale experiment on the smelting of nickel matte. Nickel concentrate from laterite saprolite was used, and CaS, produced from commercially available gypsum, was employed as a sulfurizing agent. The matte smelting experiment was conducted at 1500 °C to optimize CaS and C consumption. During smelting with CaS, matte particles form, although sufficient reduction of nickel and iron from the concentrate is not achieved. By consuming carbon, the reduction potential of iron is increased, and this process, along with enriching the matte with iron, aids in the transportation of nickel. At a nickel grade in the matte with a Ni/Fe ratio of approximately 1, the nickel recovery only reached 63%. Upon achieving a nickel recovery exceeding 93%, the Ni/Fe ratio reached 0.44, corresponding to a nickel grade reduction to 22.78%. By employing analytical techniques and thermodynamic modelling, we have successfully determined the sulfidizing of nickel, identified the ideal CaS and C additions, and characterized the structure and quality of the slag produced during nickel matte smelting, supplying vital technological data necessary for practical application.