Accurate determination of the physico-mechanical parameters of rock and soil masses is fundamental to the quantitative stability analysis and engineering mitigation of open-pit mine slopes. However, existing studies often rely on generalized parameters and lack systematic empirical data based on full-hole in situ core sampling to quantitatively verify the link between microscopic mineralogy and macroscopic instability. To address this gap, this study investigates the mineral composition, microstructure, and hydro-mechanical behavior of geotechnical materials, using the XG Open-pit Coal Mine in Inner Mongolia as a case study. Field drilling and sampling with a cumulative depth of 1500.7 m were conducted, combined with systematic laboratory tests. The results reveal significant lithological heterogeneity within the mining area. Specifically, hard rocks (e.g., fine sandstone) constitute the stable framework of the slope, whereas mudstones rich in hydrophilic clay minerals, along with low-strength coal seams, form potential weak sliding interfaces. Quantitative X-ray Diffraction (XRD) analysis reveals that the weak mudstone layers contain up to 32.4% hydrophilic expansive minerals (montmorillonite and illite/smectite). Scanning Electron Microscopy (SEM) and slake durability tests demonstrate that the mudstone is characterized by well-developed micropores (1–2 μm) and loose cementation. Theoretical analysis indicates that upon saturation, the strength of these weak layers is reduced by over 40%, causing the factor of safety (FoS) to drop from a stable 1.48 to a critical 0.89. Based on these findings, the slope instability mechanism driven by “Stiffness Mismatch and Hydro-Weakening” is elucidated. Consequently, targeted reinforcement and drainage measures are proposed to provide a scientific basis for safe mining operations.
Dou et al. (Tue,) studied this question.