Wind energy has become an essential resource for the development and diversification of the energy sector in México and worldwide. In this context, the mechanical design of turbine blades has emerged as a priority research topic, given its impact on performance and viability. The present research evaluates the aero-structural response of multiple lay-up configurations of a 6 m blade by coupling computational fluid dynamics (CFD) and finite element analysis (FEA). The fluid–structure interaction (FSI) was simulated in ANSYS, a commercial software chosen for its capacity for multivariable analysis. The nominal operating conditions included a wind speed of 10.5 m/s and a rotational speed of 100 rpm, leading to a theoretical power output of 6591 W. For the proposed lay-up configurations, the Tsai-Wu and Puck (Global IRF) criteria were estimated and remained below the critical threshold of 1.0, indicating no risk of structural failure. However, some carbon fiber/epoxy layers, including unidirectional layers in the spar caps and bidirectional layers in the structural shear web, may present failure risks under extreme loading conditions. This applies to configurations with the lowest number of layers in the mid-span spar caps; this fact is reinforced by the main effects analysis. The results emphasize the relevance of conducting comprehensive composite failure evaluations to optimize material selection and structural design, even for small-scale blades.
Alcantara-Rojas et al. (Tue,) studied this question.