To investigate the seepage and mechanical behavior of the overlying strata during solution mining in salt deposits, porous sandstones with different grain sizes were selected for study. First, a series of microscopic tests, including SEM, MIP, and NMR, was conducted to characterize the pore structure of the rocks. Subsequently, using a servo-controlled triaxial rock testing system, permeability tests covering the complete stress–strain process were performed under different confining pressures and seepage pressures based on the steady-state method, in order to analyze the seepage and mechanical characteristics of the sandstones during deformation and failure. The results indicate that the investigated aquifer sandstones are characterized by weak cementation, high porosity, large pore size, good pore connectivity, and relatively high permeability. High confining pressure enhances the mechanical strength of the sandstone while reducing its permeability, whereas increasing seepage pressure decreases mechanical strength and enhances permeability during triaxial compression under pore water pressure conditions. Throughout the complete stress–strain process, the evolution of permeability is jointly controlled by the intrinsic pore structure of the rock, the stress loading path, and the failure mode. Under high confining pressure, localized compaction bands may develop, and the formation of such localized structures suppresses any increase in permeability. Acoustic emission shows good correlations with both the stress–strain response and permeability evolution. This study provides new insights into the pore structure of loose, highly permeable sandstones and their hydromechanical coupling behavior throughout the complete stress–strain process.
Zhao et al. (Wed,) studied this question.