In response to the technical bottleneck of the Venlo greenhouse’s inability to achieve year-round production due to the high temperature and humidity in the summer in South China, this study took an existing Venlo-type greenhouse in Guangzhou as the research object and constructed a three-dimensional computational fluid dynamics (CFD) model of the greenhouse by comprehensively considering key factors such as solar radiation, thermal radiation, and crop canopy resistance. After on-site experiments, it was verified that, except for the top area of the greenhouse, the temperature deviation between the model simulation values and the measured values was less than 2 °C, and the error rate was less than 5%, confirming the model’s accurate representation of the temperature field distribution within the greenhouse. Based on the characteristics of the temperature and humidity fields revealed by the CFD simulation (canopy temperature gradient K = 0.144 °C/m, maximum temperature difference between upper and lower layers 20 °C), an optimized scheme of “wet curtain fan + salt bath dehumidification equipment” for local cooling and dehumidification of the crop canopy was proposed, and a non-uniform air duct layout was designed according to the temperature gradient characteristics. Field experiments showed that after optimization, the daytime temperature of the crop canopy was mostly controlled within 30 °C, the relative humidity was stably maintained below 80%, and the maximum temperature difference along the length of the greenhouse was reduced from 7 °C to 2 °C, effectively solving the problem of poor cooling and dehumidification effects of the traditional system. This scheme enabled the stable operation and year-round production of Venlo-type greenhouses in South China during the summer, providing technical support and engineering reference for greenhouse environmental control in high-humidity areas.
Shen et al. (Wed,) studied this question.